MINI EXCAVATOR ROCK BUCKET HOW TO
MINI EXCAVATOR ROCK BUCKET FULL

Side pin: A side pin installation style features a horizontal or left-to-right pin and requires a longer tool to disassemble.Ĭhoosing the correct bucket tooth size is crucial.Top pin: A top pin installation style refers to an excavator bucket with a vertical or top-to-bottom tooth pin.There are two primary pin installation styles for excavators: Next, identify your excavator’s bucket tooth-pin installation style and gather your tools or removal device kit. Identify the Correct Pin Installation Style Rock tooth: A rock tooth is a steel chisel tooth that penetrates and moves rock, iron ore, stone or hard ground.Ģ.However, a twin tiger tooth has a longer shelf life due to its additional penetration surface. Both a single and twin tiger tooth can easily penetrate frost, rock and hard soil during digging and trenching projects. Tiger tooth: Tiger teeth come in single or “twin” teeth.These teeth allow you to expertly excavate large quantities of soil, sand and gravel. Chisel tooth: A chisel tooth is an earthmoving tooth with a high stacking surface.The different teeth varieties include the following: Each bucket tooth type has a purpose suited to particular excavation jobs. The first step is identifying excavator bucket teeth that are appropriate.

MINI EXCAVATOR ROCK BUCKET HOW TO

Learn how to replace teeth on an excavator bucket in a few easy steps below. Periodically replacing bucket teeth is crucial to avoid damaging their adapters. Like buckets, bucket teeth also wear down over time.

MINI EXCAVATOR ROCK BUCKET FULL

Move the bucket: Move the dipper around, rotating the bucket to ensure the bucket is secure and has a full range of motion.Retract the ram: Retract the excavator’s ram to insert the front lynchpin.The rear lynchpin should snap into place. Lift the new bucket: Carefully lift the bucket into the air once you have the rear lynchpin inserted.Be careful to avoid placing your fingers in the lynchpin holes. Slide the pins into place: Slide the rear lynchpin into place.Lower the boom arm: Lower the boom arm and maneuver the dipper to line up with the new bucket’s lynchpin holes.Maneuver your boom arm to align the excavator’s dipper links above the new bucket’s ears. Align the new bucket: Reduce your excavator’s throttle speed to its lowest setting.Detach the bucket: Lift the boom arm up and away from the excavator bucket until it is no longer attached.Remove the bucket’s lynchpins: Use a screwdriver to remove the lynchpins from your current excavator bucket.Level your buckets: Place your old and new buckets side-by-side on a level surface.Knowing how to change your excavator bucket quickly will help keep your machinery in excellent condition and boost productivity.įollow these steps to change your excavator bucket: You might need to change buckets quickly on the job, as specific bucket styles are better suited to particular tasks. The bucket style you choose will also impact job efficiency. To prolong your excavator’s life, you must practice preventive maintenance, including changing worn-out buckets with new ones. If you do not replace a worn bucket, you risk exposing and damaging your excavator’s shank. Like any well-used components, excavator buckets wear out over time.

The correct bucket and bucket tooth type can reduce downtime, enhance productivity, increase cost efficiency and expedite a project. The bucket and teeth styles you choose will play pivotal roles in project efficiency and vary depending on the nature of the job. This guide will teach you how to change excavator buckets and remove and change excavator bucket teeth to make the most of your earthmoving machinery.Įxcavators and mini excavators are versatile equipment, suiting projects across multiple industries, from construction and mining to maintenance and materials handling.

Guide to Replacing Excavator Buckets and Teeth December 5, 2022

Mini excavator rock bucket